Beaded Liner Receiver

Pool Liner Bead Receiver

Beaded Pool Liner Hanger or Conversion Track

Using a pool liner bead receiver track you can easily convert your overlap pool liner to accept a beaded swimming pool liner. Pool liner bead receivers attach to the top of the pool wall to create a track where the bead liner snaps into. What is the difference between a bead and overlap liner? Beaded liners have a thick vinyl bead that installs into a track, much like the installations of inground pools, whereas an overlap liner hangs over the pool wall and is held down in place using a plastic coping strip. A benefit of beaded liners is apparent when replacing your liner. Installing a bead liner eliminates the need to take your pool apart, just snap out the old liner and snap in the new one!

Pool liner Bead Receiver strips are 4 feet long. To determine how many bead receiver strips you will need, multiply your pool's diameter by 3.14 then divide by 4 (4 foot). Example: a 15' round pool: 15 x 3.141= 47.115 ft.  divided by 4= 11.778 / needs 12 strips. You just have to cut the last plastic piece to fit. Plastic Liner receiver extrusions fit easily on the top of the above ground pool wall. Beaded liners fit better with fewer or no wrinkles, since they were made to fit the inside dimensions of the pool structure conforming to the pool interior without stretching the liner. Easy to change liners without the need to disassemble pool. Each hanger track length is 48" long and you may need to cut the last piece for an exact end to end fit for your pool size.

How Many Track Pieces Do I Need?:

• 15' Round - 12 Pcs
• 18' Round - 14 Pcs
• 21' Round - 17 Pcs
• 24' Round - 19 Pcs
• 27' Round - 21 Pcs
• 30' Round - 24 Pcs
• 12 x 24 Oval - 16 Pcs
• 15 x 24 Oval - 17 Pcs
• 15 x 24 Oval - 17 Pcs
• 15 x 30 Oval - 19 Pcs
• 16 x 32 Oval - 19 Pcs
• 18 x 33 Oval - 22 Pcs